Tesira

Wall Plates.

Biamp has partnered with Attero Tech to offer Dante™-enabled wall plates

Designed specifically for Tesira, these wall plates are designated with a “-B” at the end of the product type, which identifies a particular device as the Biamp version. Users can control audio input signal types, mute state, volume level, inversion state, and source selection for individual wall plates via Tesira software.

Attero Tech unDX21O+-B

Attero Tech unDX21O+-B

The unDX2IO+-B is a Dante-enabled multi‐IO wall plate that features two balanced mic/line XLR inputs and two balanced XLR line outputs. Two balanced inputs are available on detachable side-mounted connectors. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+-B is designed to fit into all 2- gang US junction boxes, mud rings, and old work brackets. The unDX2IO+-B is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT‐5e/6 cable. The unDX2IO+-B’s size and I/O density make it easy to put Dante connectivity wherever it’s needed, eliminating costly and interference prone analog wiring.

To order, or for more information, visit Attero Tech's website. You can also download the data sheet.

Additional information for configuring wall plates in Tesira is available on Cornerstone.

  • Small form factor, can be unobtrusively located near analog sources or sinks
  • Four input gains to accommodate common line levels, dynamic, and phantom powered mics
  • Analog output gain is software adjustable between 0dB and –60dB plus mute
  • +20dBu maximum input levels (at 0dB input gain) and +20dBu maximum output levels
  • Powered by PoE
  • +48V Phantom power
  • Dedicated I/O block available in Tesira software; users can control audio input signal types, mute state, volume level, inversion state, and source selection for each wall plate
  • Supports Tesira’s locate function for identifying a specific device in the system

The unDX2IO+-B is a Dante-enabled multi‐IO wall plate that features two balanced mic/line XLR inputs and two balanced XLR line outputs. Two balanced inputs are available on detachable side-mounted connectors. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+-B is designed to fit into all 2- gang US junction boxes, mud rings, and old work brackets. The unDX2IO+-B is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT‐5e/6 cable. The unDX2IO+-B’s size and I/O density make it easy to put Dante connectivity wherever it’s needed, eliminating costly and interference prone analog wiring.

To order, or for more information, visit Attero Tech's website. You can also download the data sheet.

Additional information for configuring wall plates in Tesira is available on Cornerstone.

  • Small form factor, can be unobtrusively located near analog sources or sinks
  • Four input gains to accommodate common line levels, dynamic, and phantom powered mics
  • Analog output gain is software adjustable between 0dB and –60dB plus mute
  • +20dBu maximum input levels (at 0dB input gain) and +20dBu maximum output levels
  • Powered by PoE
  • +48V Phantom power
  • Dedicated I/O block available in Tesira software; users can control audio input signal types, mute state, volume level, inversion state, and source selection for each wall plate
  • Supports Tesira’s locate function for identifying a specific device in the system

Attero Tech unDX4I-B

Attero Tech unDX4I-B

The unDX4I-B is a Dante-enabled multi‐IO wall plate that features four balanced mic/line XLR inputs and two balanced line outputs. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I-B is designed to fit into most 2- gang US junction boxes and is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT‐5e/6 cable. The unDX4I-B’s size and IO density make it easy to put Dante connectivity wherever it’s needed, eliminating costly and interference prone analog wiring.

To order, or for more information, visit Attero Tech's website. You can also download the data sheet.

Additional information for configuring wall plates in Tesira software is available on Cornerstone..

  • 4 balanced mic/line XLR inputs
  • 2 balanced line outputs; can be wired to any passive XLR plate such that four XLR inputs and two XLR outputs are available in a 3‐gang US junction box
  • Three software-adjustable input gain levels per input are available
  • Powered by PoE
  • +48V Phantom power
  • Dedicated I/O block available in Tesira software; users can control audio input signal types, mute state, volume level, inversion state, and source selection for each wall plate
  • Supports Tesira’s locate function for identifying a specific device in the system

The unDX4I-B is a Dante-enabled multi‐IO wall plate that features four balanced mic/line XLR inputs and two balanced line outputs. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I-B is designed to fit into most 2- gang US junction boxes and is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT‐5e/6 cable. The unDX4I-B’s size and IO density make it easy to put Dante connectivity wherever it’s needed, eliminating costly and interference prone analog wiring.

To order, or for more information, visit Attero Tech's website. You can also download the data sheet.

Additional information for configuring wall plates in Tesira software is available on Cornerstone..

  • 4 balanced mic/line XLR inputs
  • 2 balanced line outputs; can be wired to any passive XLR plate such that four XLR inputs and two XLR outputs are available in a 3‐gang US junction box
  • Three software-adjustable input gain levels per input are available
  • Powered by PoE
  • +48V Phantom power
  • Dedicated I/O block available in Tesira software; users can control audio input signal types, mute state, volume level, inversion state, and source selection for each wall plate
  • Supports Tesira’s locate function for identifying a specific device in the system

Attero Tech unD6IO-B

Attero Tech unD6IO-B

The unD6IO-B is a Dante-enabled multi‐IO wall plate that features two balanced mic/line XLR inputs, two RCA line level inputs, and one 3.5mm TRS line level input. Two balanced outputs are available on detachable side-mounted connectors. The unD6IO-B is designed to fit into most 2-gang US junction boxes and is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT‐5e/6 cable. The unD6IO-B’s size and I/O density make it easy to put Dante connectivity wherever it’s needed, eliminating costly and interference prone analog wiring

To order, or for more information, visit Attero Tech's website. You can also download the data sheet.

Additional information for configuring wall plates in Tesira software is available on Cornerstone.

  • 2 balanced mic/line XLR inputs
  • Two RCA and one 3.5mm input
  • Two balanced outputs on detachable side-mounted connectors, with software controlled volume
  • RCA inputs and 3.5mm input (carried as stereo) can be selected via software, individually or in combination, as an audio flow
  • Three software-adjustable gain levels are available on the XLR inputs
  • Powered by PoE
  • +48V Phantom power
  • Dedicated I/O block available in Tesira software; users can control audio input signal types, mute state, volume level, inversion state, and source selection for each wall plate
  • Supports Tesira’s locate function for identifying a specific device in the system

The unD6IO-B is a Dante-enabled multi‐IO wall plate that features two balanced mic/line XLR inputs, two RCA line level inputs, and one 3.5mm TRS line level input. Two balanced outputs are available on detachable side-mounted connectors. The unD6IO-B is designed to fit into most 2-gang US junction boxes and is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT‐5e/6 cable. The unD6IO-B’s size and I/O density make it easy to put Dante connectivity wherever it’s needed, eliminating costly and interference prone analog wiring

To order, or for more information, visit Attero Tech's website. You can also download the data sheet.

Additional information for configuring wall plates in Tesira software is available on Cornerstone.

  • 2 balanced mic/line XLR inputs
  • Two RCA and one 3.5mm input
  • Two balanced outputs on detachable side-mounted connectors, with software controlled volume
  • RCA inputs and 3.5mm input (carried as stereo) can be selected via software, individually or in combination, as an audio flow
  • Three software-adjustable gain levels are available on the XLR inputs
  • Powered by PoE
  • +48V Phantom power
  • Dedicated I/O block available in Tesira software; users can control audio input signal types, mute state, volume level, inversion state, and source selection for each wall plate
  • Supports Tesira’s locate function for identifying a specific device in the system

Contact Us.

Our sales and support teams are ready to help.
Contact us today.